HM_HF90 Hamilton Logo
 Operation

Operation. Starting therapy

1. Starting therapy 2. Working with the device 3. Responding to alarms 4. Preparing intrahospital transport
HF90_Start_Therapy
Learning module

1.  HAMILTON‑HF90 Starting therapy

Follow the steps needed to initiate high flow oxygen therapy and delve deeper into the Flow, Temperature, and Oxygen settings.
15 min
EN
HF90_Working_with_the_device
Learning module

2.  Working with the device

15 min
EN
HF90_Responding_to_Alarms
Learning module

3.  Responding to alarms

10 min
EN
HF90_Intrahospital_Transport
Learning module

4.  Preparing intrahospital transport

5 min
EN

Learning objectives. What will you learn?

At the end of this module you will be able to:

  • Interpret the Flow, Temperature, and Oxygen settings to deliver high flow oxygen therapy

  • Perform the steps needed to start high flow oxygen therapy

  • Perform the O2 sensor calibration

  • Validate the initial settings

Handpicked by us. For you to read

We think these publications might be helpful for you!

 

Additional resources

Document
HAMILTON‑HF90 Operator's Manual Software version 1.0.x
英語 | 6.17 MB | 10108396.00
Document
HAMILTON‑HF90 Cleaning and disinfection quick reference card
英語 | 0.47 MB | ELO2024‑101‑TW.00
Document
Setup guide: HAMILTON‑HF90 Breathing circuit set setup, Adult/Ped
英語 | 0.34 MB | ELO2024‑100‑TW.00
Document
Setup guide: HAMILTON‑HF90 Breathing circuit set setup, Neo/Ped
英語 | 0.55 MB | ELO2024‑103‑TW.00

We have detected that you are visiting our website from アメリカ合衆国.
We offer a separate version of the website for your country (アメリカ合衆国).

Switch to アメリカ合衆国